Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
without remote throttle control, with primer (
1. Press the primer button 3 times at intervals of about
2 seconds (
16). If the temperature is below
10 °C, press the primer button 5 times.
2. Pull in the safety brake handle on the handlebar and
17) – the brake handle does not lock.
hold it (
1. Pull out the starter cord sharply, then allow it to
slowly rewind (
18).
Motor speed (rpm value) is fixed.
Motor speed cannot be adjusted.
without remote throttle control, without primer/
choke
2. Pull in the safety brake handle on the handlebar and
hold it (
17) – the brake handle does not lock.
3. Pull out the starter cord sharply, then allow it to
slowly rewind (
18).
Motor speed (rpm value) is fixed.
Motor speed cannot be adjusted.
Electrostart without primer/choke (
1. Set the throttle lever to the "START" position
13/1).
(
2. Pull in the safety brake handle on the handlebar and
hold it (
16) – the brake handle does not lock.
3. Turn the ignition key fully to the right in the ignition
lock (
18).
4. As soon as the motor starts running, release the
ignition key (it returns automatically to position "0").
5. According to the desired motor speed, set the
throttle lever to a position between min and max.
16)
Turn the motor off
Lawnmower without blade coupling
1. Set the throttle lever to position min (
2. Release the safety brake handle (
Wheel drive (optional)
Switching on the wheel drive
1. Press the transmission control handle against the
Switching off the wheel drive
1. Release the transmission control handle (
13)
Vario transmission (Vario Speed) (optional)
The Vario transmission allows continuous variation of the
ground speed of the lawnmower.
„ To increase the speed, pull the lever (
„ To lower the speed, pull the lever (
- The motor is switched off.
Caution - danger of serious cut injuries!
The motor may continue running. After switching
off, make sure the motor has stopped turning.
(
Caution!
Engage the transmission only when the motor is
running.
handlebar and hold it (
control handle does not lock.
- The wheel drive is switched on.
- The wheel drive is switched off.
Caution!
Operate the lever only when the motor is running.
Operating the lever without the motor drive may
damage the drive mechanism.
20/2)
towards (
(
20/1)
Always adjust the ground speed to suit the current
ground and lawn conditions.
GB
12/2).
22).
20)
19) – the transmission
21).
20)
20) towards
27
Advertenties
Inhoudsopgave
