Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Charging the battery pack
1
Turn the power off.
If the camera is turned on, the battery pack will not be charged.
2
Using the USB Type-C cable (supplied),
connect the USB Type-C terminal on
the camera to an external power
source, such as a commercially
available USB AC adaptor or mobile
battery.
The charge lamp will light up when
charging starts. When the charge lamp
turns off, charging is completed.
• When you use an AC adaptor, use one with a rated output of 1.5 A or higher.
Attaching a lens
1
Remove the body cap from the camera and the rear lens cap from the
rear of the lens.
2
Mount the lens by aligning the two white index marks (mounting
indexes) on the lens and camera.
3
While pushing the lens lightly toward the camera, turn the lens slowly
in the direction of the arrow until it clicks into the locked position.
Mounting indexes
EN
Charge lamp
EN
5
Advertenties
Inhoudsopgave
