Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operating Instructions
VC-C909
Power Bank PD140W 27000mAh PD3.1
Item no: 3200729
1 Operating Instructions for download
Use the link
www.conrad.com/downloads
complete operating instructions (or new/current versions if available). Follow the instructions
on the web page.
2 Intended use
The product is a power bank. Use the product to charge or power devices via USB.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers
Forum.
3 Delivery contents
■
Product
■
USB-C® to USB-C® cable
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
Read the operating instructions carefully.
The symbol warns of hazards that can lead to personal injury.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
3
(alternatively scan the QR code) to download the
■
Operating instructions
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Li-ion battery
■
The rechargeable battery is permanently built into the product and cannot be replaced.
■
Never damage the rechargeable battery. Damaging the casing of the rechargeable bat-
tery might cause an explosion or a fire!
■
Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or
the product into fire. There is a danger of fire and explosion!
■
Charge the rechargeable battery regularly, even if you do are not using the product. Due
to the rechargeable battery technology being used, you do not need to discharge the re-
chargeable battery first.
■
Never charge the rechargeable battery of the product unattended.
■
When charging, place the product on a surface that is not heat-sensitive. It is normal that
a certain amount of heat is generated during charging.
5.6 Connected devices
■
Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
5.7 Charging
■
Make sure the specifications of any connected device conform to the product specifica-
tions listed in the technical data section
■
Do not cover the product and the devices you connect. Risk of fire.
■
Do not short-circuit ports.
6 Components
12
11
10
9
8
1
Charging status of rechargeable battery 2
3
Current drawn from rechargeable bat-
tery
5
Time passed since operation start
7
USB-C® output port C2
9
Power button ON/OFF
11 Power statistics of port C2
7 Charging the rechargeable battery
Important:
Do not charge the power bank using the USB-A ports on a computer. The current sup-
plied by these ports may not be sufficient and can damage the computer.
1. Connect a suitable USB-C® cable to the input port C1 IN/OUT.
à
The display shows the charging status of the rechargeable battery.
à
If the display shows 100% the rechargeable battery is fully charged.
2. Disconnect the USB cable after charging.
8 Charging devices
You can charge devices on all ports at the same time.
Output ports C2 OUT and USB-A OUT:
1. Connect devices to the output ports C2 OUT and USB-A OUT.
2. Start charging by pressing the power button ON/OFF.
à
The display shows power statistics of each connected output port.
3. To interrupt the charging process, press the power button ON/OFF.
4. To continue charging, press the power button ON/OFF again.
Output port C1 IN/OUT:
1. Connect a device to the output port C1 IN/OUT.
à
The product switches on.
1
2
3
4
5
6
7
Voltage of rechargeable battery
4
Temperature of rechargeable battery
6
USB-C® input and output port C1
8
USB-A output port USB-A
10 Power statistics of port USB-A
12 Power statistics of port C1
Advertenties
Inhoudsopgave
