Download Inhoudsopgave Inhoud Print deze pagina

Removing The Grease Filters; Replacing The Carbon Filter; Lighting - ETNA AP460 Series Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

MAINTENANCE
Grease filters
Carbon filter

Lighting

EN 8
Removing the grease filter
Switch off the electricity! Remove the plug from the socket or switch
the electricity off at the mains. Pull the grease filter towards you and tilt
it downwards at the front.

Replacing the carbon filter

The carbon filter must always be used if the cooker hood is not ducted.
• Remove the grease filter.
• Attach the carbon filters to the motor.
• Replace the grease filter.
Note!
• Saturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• Preferably cook with a lid on the pan; this extends the life of your
filter, reduces cooking odors and saves energy. An carbon filter that
is too moist due to water vapors reduces the effectiveness of the
filter.
• For optimal odor reduction, the carbon filter must be replaced at
least every four months.
• The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.
This hood is fitted with a light system. This light system has to be
replaced by an authorized technician. Do not attempt to replace it
by yourself.
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Ap490 series

Inhoudsopgave