Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operating the fan anemometer
5.7
Displaying the lowest and highest measured values
Fig. 8: Maximum value
50
When in the normal Measuring mode, press
•
and hold the HOLD/MIN/MAX key for 3 sec-
onds.
The lowest measured values are displayed. MIN
is shown in the display.
Press and hold the HOLD/MIN/MAX key again
•
for 3 seconds.
The highest measured values are displayed. MAX
is shown in the display.
•
To return to the normal Measuring mode,
press and hold the HOLD/MIN/MAX key again
for 3 seconds.
To toggle between the individual readings on
•
the display when in the MIN or MAX mode,
press the Up key (top part of the display) or
the Down key (lower part of the display).
Advertenties
Hoofdstukken
Inhoudsopgave
