Inhoudsopgave
Advertenties
Operation by
This device can be used by children aged 8 years and over, as well as individuals
children and per-
with reduced physical, sensory or mental capabilities, or a lack of experience and
sons with limita-
knowledge, if such persons are under supervision or have received instruction
tions
concerning use of the device in a safe way and if they understand the risks invol-
ved. Children must not play with the device. Children must not perform cleaning
or user maintenance unless supervised.
Safety measures
Operate devices with ground conductors only on a grid with a ground conductor
in normal opera-
and a socket with a ground conductor contact. Operating the device on a grid wi-
tion
thout a ground conductor or on a socket without a ground conductor contact is
considered gross negligence. The manufacturer accepts no liability for any dama-
ge resulting from improper use.
Only operate the device in accordance with the protection class shown on the ra-
ting plate.
Never commission the device if it is damaged.
Have the grid and device supply lead regularly inspected by an electrician to en-
sure that the ground conductor is functioning properly.
Safety devices that are not fully functional and components with defects must
be repaired by an authorized specialist before the device is turned on.
Never bypass or disable protection devices.
A freely accessible mains plug is required after installation.
EMC Device
Devices in emission class A:
Classifications
-
-
Devices in emission class B:
-
EMC device classification as per the rating plate or technical data.
EMC measures
In certain cases, even though a device complies with the standard limit values for
emissions, it may affect the application area for which it was designed (e.g. when
there is sensitive equipment at the same location, or if the site where the device
is installed is close to either radio or television receivers).
If this is the case, then the operating company is obliged to take appropriate ac-
tion to rectify the situation.
Maintenance
Before switching on, always check the mains plug and cable as well as charger
leads and charging terminals for any signs of damage.
If the surface of the device housing is dirty, clean with a soft cloth and solvent-
free cleaning agent only.
50
Are only designed for use in industrial settings
Can cause line-bound and radiated interference in other areas
Satisfy the emissions criteria for residential and industrial areas. This is also
true for residential areas in which the energy is supplied from the public low-
voltage mains.
Advertenties
Hoofdstukken
Inhoudsopgave
