Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Reassembling the doorbell-pushbutton
a) If you have changed only the name tag, proceed to
step e).
b) Before assembling ensure that the small screw (fig. 1
B) can grip at the right spot. If required turn one part of
the housing by 180°. Please make sure that the rubber
gasket sits correctly within the housing.
c) Insert the front face into the housing of the doorbell
push button and press both firmly together until the
housing parts lock in place.
d) Carefully drive in the small screw (fig. 1 B) with a
small Phillips screwdriver.
e) Now hold the doorbell pushbutton in such a way that
the small screw (fig. 1 B) is on the right.
f) At the right side of the pushbutton there is a small
opening (fig. 1 C) where the hinge pin of the transparent
plastic face can be inserted.
g) You can now position the transparent plastic face in
such a way until it has almost reached its final position.
You only have to carefully press the small pin (fig. 1 A)
and lock the transparent plastic face in place.
Mounting the doorbell-pushbutton
You can mount the doorbell-pushbutton using the sup-
plied strips of double-sided tape. Take care to adhere it
to a smooth, dry and clean surface.
Important note:
Kindly keep in mind that metal parts and other building
materials may interfere with the transmission of the ra-
dio signal.
English 21
Advertenties
Inhoudsopgave
