Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operation / Function
• Insert glue sticks into the heating
channel at the back.
• Rest applicator on wire stand (placing
a piece of cardboard or wood under-
neath it if necessary).
• Let glue applicator heat up for approx.
8 minutes (GM 1007-LT) or 6 minutes
(GM 1007).
• Press trigger and apply glue to one side.
• Firmly press together the materials
being glued, correcting alignment if
necessary.
• Final bonding strength is reached
after a very short time (approx. 2
minutes)!
Tool features
1. Nozzle
2. Trigger
3. Power cord
4. Stick
Applications for GlueMatic 1007-LT / 1007
• Making floral wreaths and flower arrangements
• Repairing wooden drawers
• Craft and design work with paper
• Repairing model wooden aeroplanes
Disposal
Electrical and electronic equipment, ac-
cessories and packaging must be recycled
in an environmentally compatible manner.
Do not dispose of electrical and
electronic equipment as domestic
waste.
• Spot gluing is recommended on long
items with large surfaces.
• Rigid foam (e.g. polystyrene) can also
be glued without a problem. Merely
remember to apply the hot glue on
the base surface and not on the
polystyrene. (GM 1007)
• When gluing textiles or similar mate-
rials, it is recommended to apply the
hot glue in "wavy" lines.
• After use, set tool on stand
and let it cool down.
EU countries only:
Under the current European Directive on
Waste Electrical and Electronic Equipment
and its implementation in national law,
electrical and electronic equipment no
longer suitable for use must be collected
separately and recycled in an environmen-
tally compatible manner.
- 15 -
GB
Advertenties
Inhoudsopgave
