ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1.
Top panel
2.
Left panel
3.
Right panel
4.
Lower panel
5.
Screw for wheels
6.
Rear panel
7.
Lower panel
Note:
The graphics in this manual are schematic representations and may not exactly match
the product.
2. BEFORE USE
•
This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
•
Make sure all parts and components are included and in good conditions. If there is
any piece missing or not in good condition, immediately contact the Technical Support
Service of Cecotec.
•
Gas-regulating valve and connection hose not provided with the product.
•
The maximum size of the gas cylinder that can be installed in the device are: "305-mm
diameter and 585-mm maximum height".
•
The pressure regulator is set for 28-30 mbar, 37 mbar, or 50 mbar. The gas regulator
must be installed in accordance with the specific gas regulations (see technical data)
and comply with the EN16129 standard.
•
The hose must comply with the EN16436 standard. The maximum length of the hose
must not exceed 0.5 m.
Box contents:
•
Ready Warm 4000 Slim Fold gas heater
•
Manual
34
READYWARM 4000 SLIM FOLD