Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
▶ Comply with the manufacturer's instructions for handling and storing saw blades.
▶ The user and any other persons in the vicinity must wear suitable eye protection, a hard hat, ear
protection, protective gloves and breathing protection while the power tool is in use.
▶ Always use a saw blade of appropriate length. The saw blade must project past the workpiece throughout
the entire stroke.
▶ Take breaks between working and do relaxation and finger exercises to improve the blood circulation in
your fingers.
▶ Do not look directly into the light source (LEDs) of the power tool and do not aim the beam at other
persons' faces. Risk of dazzling or eye damage.
▶ Flying fragments can injure the body and eyes. Wear your personal protective equipment and always
wear protective glasses and protective gloves.
▶ If work involves break-through, always secure the area on the side opposite where the work is carried
out.
2.5
Careful handling and use of batteries
▶ Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Contact Hilti Service.
3
Description
3.1
Product overview
3.2
Intended use
The product described is a cordless reciprocating saw. It is designed for cutting wood, wood-like materials,
metals and plastics.
The product is designed for two-handed operation.
▶ Use only Hilti Li-ion batteries from the B 36 series with this product.
▶ Use only Hilti battery chargers from the C4/36 series for these batteries.
*2186517*
1
2186517
Tool holder
@
Mount for cutting assist
;
Folding scaffold hook
=
Speed preselection
%
Safety lock
&
Control switch
(
Rear grip
)
Battery state of charge indicator
+
Battery release button
§
Battery
/
Attachment eye for lanyard
:
Front gripping area
∙
Saw blade release lever
$
Dust removal adapter (USA: accessory)
£
Contact shoe
|
Release button for contact shoe
¡
Saw blade
Q
Cutting assist (accessory)
W
English
17
Advertenties
Inhoudsopgave
