Getting Started; Using The Clearreader For The First Time; Opening The Camera Arm; Positioning A Document - Optelec ClearReader+ Handleiding
Verberg thumbnails
Zie ook voor ClearReader+:
- Gebruikershandleiding (30 pagina's) ,
- Gebruikershandleiding (250 pagina's) ,
- Gebruikershandleiding (126 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Optelec
ClearReader
+
3. Getting Started
3.1. Using the ClearReader
+
for the first time
When you use the Optelec ClearReader
+
for the first time, the battery needs to
be charged. To charge the battery, connect the ClearReader
+
to a mains
power outlet using the ClearReader
+
power supply. Charging takes
approximately 3 hours.
3.2. Opening the camera arm
To open the camera, locate the "push" sign on the camera arm at the front
of the ClearReader
between the speakers. Gently push on the camera arm
+
until you hear a click. The arm will eject and move towards you. Close the
camera arm in the same way by pushing the end of the arm back to the
closed position until you hear a click.
3.3. Positioning a document
The Optelec ClearReader
+
camera can capture an area of an A4 or letter-
size page measured from the front side of the ClearReader
+
. To position the
document, place it in front of the ClearReader
+
between the two document
positioning indicators with the top edge of the document aligned towards the
front of the unit. The orientation of the document will not influence the
recognition of the text.
29
English
Advertenties
Inhoudsopgave
Probleemoplossen
