Turning On The Clearreader; Standby Mode; Turning Off The Clearreader - Optelec ClearReader+ Handleiding
Verberg thumbnails
Zie ook voor ClearReader+:
- Gebruikershandleiding (30 pagina's) ,
- Gebruikershandleiding (250 pagina's) ,
- Gebruikershandleiding (126 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Optelec
ClearReader
+
+
3.4. Turning on the ClearReader
To turn on the ClearReader
, press the round Power button on the right-hand
+
side. The start-up process will take approximately 40 seconds. You will hear a
series of beeps to indicate that the ClearReader
+
is starting up followed by the
start-up sound. Now the Power indicator is lit up and the ClearReader
+
is ready
to use.
3.5. Standby mode
The ClearReader
+
will go into standby mode by pressing and holding down the Back button and
Forward button for 2 seconds. The standby sound will be played, the Power indicator will start
blinking and the ClearReader
+
will go into standby mode. To wake up the ClearReader
+
from
standby, press the Power button. When the batteries are fully charged, the standby time of the
ClearReader
is approximately 40 hours. After 40 hours the ClearReader
will power down. If
+
+
switching-on the ClearReader
+
from the standby mode, the start-up process will take
approximately 5 seconds.
+
3.6. Turning off the ClearReader
Press the Power button to power down the ClearReader
completely. The power down sound will
+
be played and the Power indicator will turn off.
English
30
Advertenties
Inhoudsopgave
Probleemoplossen
