Cleaning The Pre-Filter - Winix Zero Pro Gebruikershandleiding
Inhoudsopgave
Beschikbare talen
Beschikbare talen
FILTER CARE
4. Cleaning the Pre-filter
Intervals between filter cleanings may vary depending on the air quality.
Use a vacuum cleaner or soft brush to clean
①
the Pre-filter. If it is excessively dirty, wash
with room temperature water.
ˍ Use only water, do not use volatile
substances such as alcohol or acetone.
※ If the pre-filter becomes damaged
or in any way needs replacement:
Please contact your local
dealer
NOTICE
English
ˍ Do not use benzene, alcohol, or other volatile fluids, which
may cause damage or discoloration.
ˍ The Pre-filter is reusable after cleaning.
ˍ Do not use hot water over 40°C or volatile fluids such as
paint thinner.
ˍ After washing the pre-filter, allow it to dry completely in a
wellventilated area. Otherwise, it may develop a bad odor.
ZERO Pro
16
Hoofdstukken
Inhoudsopgave
