Download Inhoudsopgave Inhoud Print deze pagina

Troubleshooting; Specifications - Sharp Fu-40Se Gebruiksaanwijzing

Verberg thumbnails Zie ook voor FU-40SE:
Inhoudsopgave
Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 73

TROUBLESHOOTING

Before calling for repair, check the symptoms below for possible remedies, since the problem may
not be a malfunction of the unit.
SYMPTOM
The remote control does not
work
Odors and smoke cannot be
removed easily
The Clean sign lights green
even when the air is dirty
The Clean sign lights orange
or red even when the air is
clean
The cluster ion lamp remains
green (blue) and does not
change
A sound is
Click, click
heard from
the unit
Tick, tick, tick
The discharged air smells
The unit does not operate
even when smoking ciga-
rettes

SPECIFICATIONS

Power supply
Fan level adjustment
Fan level
Rated power
operation
Fan level
Applicable floor surface
Cord length
Dimensions
Weight
About the reduction of standby power
In order to operate the electrical circuits while the power plug is inserted in the wall outlet, this product
consumes about 0.8W of standby power.
(At this time, the power lamp will be on) For the conservation of energy, remove the power plug when
not using the unit
All manuals and user guides at all-guides.com
REMEDY (not a malfunction)
• Has the batteries depleted?
• Are the batteries inserted with correct polarity?
• Is a fluorescent lighting in the room flickering due to
service life? (Refer to E-3)
• Are the filters heavily dirty? (Refer to E-13)
• Is the opening of the dust sensor blocked or clogged?
• Was the air already dirty when the power plug was
inserted into the wall outlet? (Refer to E-4)
• The sensitivity of the sensor becomes unstable when
the opening of the dust sensor is dirty or is clogged.
Clean the dust around the sensor opening using a
vacuum cleaner. (Refer to E-12)
• During the Clean mode (or Refresh mode), the cluster
ion lamp color will not change.
• This is the sound that is emitted when the unit is in
the Refresh mode.
If the sound is irritating, switch the unit to the Clean mode.
• This is the sound that is emitted when the unit is gener-
ating cluster ions.
If the sound is irritating, such as when sleeping, etc., set
the Cluster ion mode to OFF.
• The ozone generated by the cluster ion generator may
have an odor. However, the density of ozone generated
is very little and is harmless to the human body.
Furthermore, the ozone decomposes quickly so it does
not accumulate in the room.
• Is the unit installed in a location that is difficult for the
sensors to detect cigarette smoke?
• If the odor or dust sensor openings blocked or clogged?
(In this case, clean the openings.) (Refer to E-12)
The applicable floor surface area is the surface area
for when operating the unit in Max fan level.
(According to Japan Electrical Manufacturers' Asso-
ciation JEM1467)
Max
39W
3
240m
~31m
2.5m
415mm(W)X197mm(D)X572mm(H)(W/ stand)
6.6kg
E-14
220V-240V 50Hz
High
Median
21W
10W
3
/hour 180m
/hour 117m
2
Silent
4W
3
3
/hour
30m
/hour
Inhoudsopgave
loading

Inhoudsopgave