Download Inhoudsopgave Inhoud Print deze pagina

Safety Information; Definition Of Signal Warnings And Symbols; Warning Symbols; Safety Precautious - OHAUS Valor 2000W Series Gebruikershandleiding

Verberg thumbnails Zie ook voor Valor 2000W Series:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 28
Valor™ 2000W Series User Guide

1. Safety Information

1.1. Definition of Signal Warnings and Symbols

WARNING
For a hazardous situation with medium risk, possibly resulting in injuries or death if
not avoided.
CAUTION
For a hazardous situation with low risk, resulting in damage to the device or the
property or in loss of data, or injuries if not avoided.
ATTENTION
For important information about the product.
Note
For useful information about the product.

1.2. Warning Symbols

General hazard

1.3. Safety Precautious

CAUTION: Read all safety warnings before installing, making connections, or servicing this
equipment. Failure to comply with these warnings could result in personal injury and/or prop­
erty damage. Retain all instructions for future reference.
• Verify that the local AC power supply voltage is within the input voltage range printed on the AC
adapter's ratings label.
• Only connect the AC adapter to a compatible grounded socket.
• Position the instrument such that the AC adapter can be easily disconnected from the socket.
• Position the power cord so that it does not pose a potential obstacle or tripping hazard.
• Operate the equipment only under ambient conditions specified in the user instructions.
• Do not operate the equipment in hazardous or explosive environments.
• Disconnect the equipment from mains power before cleaning or servicing.
• Service should only be performed by authorized personnel.

1.4. Intentded Use

Use the instrument exclusively for weighing as described in the operating instructions. Any other type of
use and operation beyond the limits of technical specifications without written consent from OHAUS, is
considered as not intended.
This instrument complies with current industry standards and the recognized safety regulations;
however, it can constitute a hazard in use.
If the instrument is not used according to these operating instructions, the intended protection of the
instrument may be compromised and OHAUS assumes no liability.
Electrical Shock
EN- 3

Advertenties

Inhoudsopgave

Probleemoplossen

loading

Inhoudsopgave