Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
30
6. a. Press the 'home button' on your phone and go to 'settings'
b. Go to 'Wi-Fi' (If Wi-Fi is turned off, please turn it back on).
c. Tap on the name of the camera 'LuvionConnect-XXXXXX' in your Wi-Fi list.
d. After the camera is connected, please return to the LuvionConnect app.
(see fig. A4)
NOTE: In the Android app you can also use the WiFi hot key
the name of the camera from the WiFi list and use the back key of your phone
(bottom right) to return to the app. (Also see A4)
7. The app/camera will scan all available Wi-Fi networks within range. Select your
home Wi-Fi network and enter the correct password for this Wi-Fi network. (See
fig. A5).
NOTE: Please make sure you enter the correct password for the Wi-Fi network
otherwise a connection error will occur.
NOTE 2: It can take a few minutes before the camera is connected to your Wi-Fi
network, until that time the status "Connect" is displayed.
8. The standard password "12345678" must now be changed to a secure personal
password, enter your new password and repeat it for verification. (see fig. A8).
Only uppercase, lowercase, numbers and the following special characters are
supported: "!#$%&'()*+,-./:;<=>?@[\]^_{|}~"
NOTE: If you get the "wrong password" status, you have probably used an unsup-
ported character, remove the camera and follow the steps from 6.4 again.
9. In the app you will now see the new camera added to the list, tap the camera
here to start watching the live video feed. (see fig. A7)
NOTE: If your monitor is on during this process, the monitor will disconnect from
the camera and automatically reconnect in around 10 seconds.
A5
A4
A6
, after choosing
A7
A8
Advertenties
Inhoudsopgave
