TFA 38.2030 Gebruiksaanwijzing pagina 6
Beschikbare talen
Beschikbare talen
TFA_No. 38.2030 Anleit_06_23
Stop watch
• The display shows the current time and the icon of the week-
day is highlighted.
• Press the START/STOP button while in normal mode to switch
between time and date.
5.2 Alarms
Alarm clock function
• Press the MODE button twice while in normal mode to enter
the setting mode for the alarm time.
• The icon of the hour and the day-of-the-week start flashing.
• Press the START/STOP button to set the hours.
• The alarm symbol appears on the display.
• The alarm is activated.
• Press the LAP/SET/RESET button.
• The minute digits are flashing.
• Press the START/STOP button to adjust the minutes.
• Press the MODE button to confirm the settings.
• The current time appears on the display, the alarm symbol and
the icon of the day-of-the-week is highlighted.
• When the alarm time is reached, the alarm will ring.
• If the alarm is not stopped with the LAP/SET/ RESET button,
the alarm sound will automatically turn off after a few seconds
and will be reactivated at the same time.
• Press the START/STOP button and the snooze function will be
activated. The alarm sound will be reactivated after 5 minutes.
• Press the LAP/SET/RESET and the START/STOP buttons at the
same time to activate/turn off the alarm function.
• The alarm symbol appears/disappears on the display.
• Press the LAP/SET/RESET button while in normal mode to
change between the time and the alarm time.
5.3 Hourly chime
• Press and hold the LAP/SET/RESET button while in normal
mode.
• The adjusted alarm time appears on the display.
• Press the MODE button at the same time to activate the hourly
chime.
• Under all the icons of the day-of-the-week black highlights
appear.
• The hourly chime is now activated.
• To deactivate the hourly chime, press and hold the LAP/SET/
RESET button and press the MODE button at the same time to
deactivate the function.
• The black highlights disappear.
10
05.06.2023
16:05 Uhr
Stop watch
5.4 Stop watch function
• Press the MODE button while in normal mode to enter the stop
watch mode. In the stop watch mode the black highlights are
flashing.
• With the START/STOP button you can start and stop the
countdown.
• Press the LAP/SET/RESET button to clear the countdown.
• The total countdown will be 29 minutes and 59.99 seconds
and the indication of the counted time will be in 100th of a se-
cond interval.
• After the first 30 minutes the clock will automatically switch to
one second increment.
• After that, the smallest unit will no longer be 100th of seconds
but only full seconds.
5.4.1 Split time measurement
• Press the START/STOP button to activate the stop watch.
Press the LAP/SET/RESET button and the elapsed time will be
displayed. The stop watch is running in the background and by
pressing the LAP/SET/RESET button again, the current time
appears on the display. With this function, it is possible to
measure any number of split times from the start.
5.4.2 Storing the split time
• Start the stop watch with the START/STOP button. If the first
runner arrived at the destination, press the LAP/SET/RESET
button and with the second runner the START/STOP button.
On the display you can read the time of the first runner and by
pressing the LAP/SET/RESET button the time of the second
runner. Press the LAP/SET/RESET button again to clear the
values.
6. Battery replacement
• Change the battery when the display and/or the sound become
weak.
• Open the battery compartment by unscrewing the five small
screws with a suitable screwdriver.
• Remove the cover carefully.
• Put a new battery LR 44 (+ pole above)
• Before you screw the cover back on again, insert the hand
strap into the two slots.
Seite 6
11
