Using The 300Ml Mixing Container; Using The Mixing Jug (1200Ml) - WMF KULT X Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor KULT X:
- Gebruiksaanwijzing (104 pagina's) ,
- Gebruiksaanwijzing (33 pagina's) ,
- Gebruiksaanwijzing (23 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
To stop the appliance, press the MIN/MAX button again. Both speeds run for a maximum of 60
seconds before mixing is halted automatically. Mixing may be repeated, although you should first
allow the device to cool down for about a minute.
7. Switch off the device by pushing the On/off button. The LED ring goes off.
Note: You can also stop the mixing process anytime by pushing the On/off switch.
8. Unplug the appliance from the mains before removing the mixing container from the drive unit by
turning the container in an anticlockwise direction.
9. Turn the mixing container upside-down so that the blade unit is pointing upwards.
10. Turn the blade unit in an anticlockwise direction and remove it.
Caution! Never place the blade unit with the blades pointing downwards. This can damage the
blades and scratch surfaces.
11. You can now pour out your smoothie, juice or shake. Alternatively, you can also use the mixing
container as a bottle. For this you must screw a drinking cap (10) onto the mixing container.
Using the 300ml mixing container
The small mixing container is particularly suitable for dry ingredients, which you can chop or cut up
using the flat blade. We recommend always using the pulse function for this so that you can regulate
the duration and intensity of the mixing process. However, you should not mix for longer than 30
seconds at a time. You can then repeat the process after a pause of about one minute.
Fill and close the mixing container as described in the chapter entitled "Using the mixing containers
(500ml and 700ml)." Having successfully chopped up your ingredients, remove the mixing container
from the drive unit and unscrew the blade unit.
A lid (15) is supplied for storing the prepared ingredients, if desired.
Using the mixing jug (1200ml)
1. Remove the lid (2) from the mixing jug and turn it upside-down. Then attach the desired blade unit
to the base of the jug by turning it in a clockwise direction. We recommend using the cross blade
(5). Check that the blade unit is fastened firmly to the jug and forms a tight seal.
2. Turn the jug back around and add the desired ingredients, which you have previously chopped into
small pieces. Please note the MAX mark. Always add at least 100ml of liquid (e.g. water, juice or
milk) to ensure that you get a homogeneous mixture.
3. Place the lid on the jug. Ensure that the lid is attached firmly and the closing cap (1) is inserted
correctly. The filler opening can be used to add extra ingredients to the jug whilst mixing.
Warning! Moving blade may cause splashing!
4. Now follow instructions numbers 3-8 in the chapter entitled "Using the mixing containers (500ml
and 700ml)."
5. Remove the lid from the jug to pour out your freshly prepared smoothie or shake.
13
Advertenties
Inhoudsopgave
