FUXTEC FX-GS36 Gebruiksaanwijzing pagina 29
Inhoudsopgave
Beschikbare talen
Beschikbare talen
Step 5
▪
•
Loosen the two screws M5x10 and the nuts on the pressure plate
•
Place the plastic part in the slot of the printing plate
•
Retighten the screw M5x10 and its nut
Fasten safety splint at the end of the shaft
Manual_FX-GS36_Int24_rev8
Slide the end of the steel wire into the small hole of the control panel
29
Inhoudsopgave
