Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection after transport
Checking for damage and the completeness of the device must be carried out upon receipt of the package.
In the event of identification of damage due to transport, refuse or accept the delivered product only with
reservations *. A complaint detailing the defects observed must then be made. The collection of damages is
only possible in the event of a complaint formulated within the prescribed time limits, ie 24-48 hours at most.
* written on the correct paper or digital delivery of the carrier.
3.2 packaging
The packaging of the device must be kept in case of moving, or for a return to the after-sales service. The
inner and outer packaging must be completely removed before using the device. The standards in force in
your country concerning environmental protection must be observed before destroying the packaging.
3.3. Storage
WARNING
The device can be kept in stock, but only in its original, closed packaging.
Storage can be carried out in accordance with these conditions:
• Storage in a dry and non-humid place
• Sheltered from the sun
• Control of the stock greater than 2 months (general condition of the device and all the elements constituting
it)
• No material shaking
• Storage in a closed room and not outside.
4. EQUIPMENT CHARACTERISTICS
* Subject to change
Model
Power
Voltage
Weight
Heated
Dimensions
Model
Power
Voltage
Weight
Heated
Dimensions
CPDSAP
1100W
230V / 50-60Hz
30 kg
Quartz
W 680 x D 600 x H 655 mm
CPDSPM
750W
230V / 50-60Hz
57 Kg
Lamp
W 600 x D 700 x H 1600 mm
CPDSAPI
750W
230V / 50-60Hz
31.5 Kg
Lamp
W 680 x D 700 x H 800 mm
CPDSGM
1000W
230V / 50-60Hz
63 Kg
Lamp
W 800 x D 700 x H 1600 mm
EN
Advertenties
Hoofdstukken
Inhoudsopgave
