Sequencing mode "UMSCHALTMODUS"
UMSCHALTZEIT
KAM1:
KAM2:
KAM3:
KAM4
QUAD:
ZEIT:
VERLASSEN: MENUTASTE 2 SEK.
Proceed as follows to select between the two options of each value:
1. Use the arrow keys ▲ (5) and ▼ (6) to move the cursor to the item you want to change.
2. Use the +/- keys (7) and (8) to change the value of the item.
Once you have finished entering the dwell time, press the
menu item.
Settings "EINSTELLUNGEN"
1. SUMMER: SIGNAL: 05 SEK
SENSOR: 05 SEK
ALARM: 05 SEK
2. SPIEGEL: KAM1: AN
KAM2; AN
KAM3: AN
KAM4: AN
3. LINIE:
WEISS
Proceed as follows to change the settings:
1. Use the arrow keys ▲ (5) and ▼ (6) to move the cursor to the item you want to change.
2. Use the +/- keys (7) and (8) to change the value of the item.
BUZZER "SUMMER"
The Buzzer item defines the duration of the acoustic signal when an event occurs.
SIGNAL:
Duration of the acoustic alarm when there is video signal loss.
SENSOR:
Duration of the acoustic alarm when motion is detected.
ALARM: Duration of the acoustic signal when an external alarm input is activated.
MIRROR FUNCTION "SPIEGEL"
The MIRROR FUNCTION defines for each camera input whether it should be a 180° mirrored image.
SEPARATOR LINE "LINIE"
The SEPARATOR LINE item defines the colour of the line separating the quadrants in the quad display.
When you have finished entering the name, press the
item.
The SEQUENCING MODE menu item shows the following
10-00-03
inf
ormation:
22:12:05
Camera selection
Dwell time "ZEIT"
This value defines how long each camera picture is displayed in the
Sequencing mode and which cameras are to be displayed in the
Sequencing mode.
The SETTINGS menu item shows the following information:
10-00-03
22:12:05
Buzzer "Summer"
Mirror function "Spiegel"
Separator line "Linie"
Each of these selection items gives you a choice of two options.
Usually the choice is ON "AN" or OFF "AUS". The functions of the
individual values are described below.
Menu key for at least two seconds to exit the
Menu key for at least two seconds to exit the menu
32