Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6. Cleaning and maintenance
6.1 Safety advice
o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
To insure maximum quality and proper hygienic condition of cooled food products,
o
the unit should be cleaned daily.
To wash the unit, use warm water and a mild cleaning agent.
o
Rinse the unit with clean water and dry thoroughly.
o
Use only soft cloth, never use scouring pads which may scratch the unit.
o
Never use harsh or abrasive objects nor solvents or thinners.
o
The condenser must be kept clean by removing dust and dirt, so that air circulation
o
is not reduced. To reach the condenser, remove the plate at the rear of the unit.
When doing so, take care to not damage any cables.
Use a vacuum cleaner to clean the condenser. Never use sharp and/or scraping
objects.
After cleaning the condenser, replace the plate and turn the screws completely.
6.3 Safety instructions for maintenance
o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
- 47 -
Advertenties
Hoofdstukken
Inhoudsopgave
