Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5.3.3 Setting the DMX start address
GB
For separate control of all DMX units connected to
the light controller, each unit must have its own
start address. If the first DMX channel of the spot-
light is to be controlled by the light controller via
DMX address 17, for example, set the start address
on the spotlight to 17. All other DMX channels of the
spotlight will be automatically assigned to the fol-
lowing addresses. The following table is an exam-
ple with the start address 17:
Number of
addresses
DMX channels
assigned
3
4
5
10
Fig. 2 DMX address assignment for start address 17
1) Press the button MENU repeatedly until the
highest menu level has been reached.
2) Press the button UP or DOWN repeatedly until
the display indicates
3) Press the button ENTER. The display indicates
and a number between 1 and 512.
4) Use the button UP or DOWN to set the start
address.
5) Now the spotlight can be operated with the light
controller.
If not, go to the menu item
button ENTER. If the display indicates
use the button UP or DOWN to set the indication
to
.
5.3.4 Using subaddresses
With subaddresses, it is possible to independently
control up to 66 spotlights (spotlight groups) via
one DMX start address. Thus, the maximum num-
ber of DMX units that may be controlled is sub-
stantially increased. The spotlights with a subad-
dress are selected via DMX channel 10 (fig. 8). All
spotlights with the same subaddress may be con-
trolled in sync if DMX channel 10 is set to a DMX
value smaller than 10.
1) Set the spotlight for the control via 10 DMX
channels,
setting
).
2) Press the button MENU repeatedly until the
highest menu level has been reached.
3) Press the button UP or DOWN repeatedly until
the display indicates
4) Press the button ENTER. The display indicates
and a number between 01 and 66.
16
All manuals and user guides at all-guides.com
DMX
Next possible start address
for the
succeeding DMX unit
17 – 19
20
17 – 20
21
17 – 21
22
17 – 26
27
.
and press the
chapter 5.3.2 (menu item
.
5) Use the button UP or DOWN to set the sub -
address.
6) Press the button MENU repeatedly until the dis-
play indicates
7) Press the button UP three times so that the dis-
play indicates
8) Press the button ENTER. The display indicates
,
,
,
9) Press the button UP or DOWN repeatedly until
the display indicates
10) Press the button ENTER. If the display indicates
, the function for subaddress selection is acti-
vated. If it indicates
DOWN to set the indication to
11) To be able to control the spotlight by DMX, press
the button MENU twice to return to the highest
menu level.
12) To be able to operate the spotlight, set the DMX
channel 10 at the light controller to the DMX
value that corresponds to the sub address of the
spotlight:
DMX
Sub -
DMX
value
address
value
000 – 009
all
010 – 019
01
212
020 – 029
02
213
030 – 039
03
214
040 – 049
04
215
,
050 – 059
05
216
060 – 069
06
217
070 – 079
07
218
080 – 089
08
219
090 – 099
09
220
100 – 109
10
221
110 – 119
11
222
120 – 129
12
223
130 – 139
13
224
140 – 149
14
225
150 – 159
15
226
160 – 169
16
227
170 – 179
17
228
,
180 – 189
18
229
190 – 199
19
230
200 – 209
20
231
210
21
232
211
22
233
Fig. 3 Selection of spotlights with a subaddress via DMX
channel 10
again.
.
,
or
.
.
, use the button UP or
.
Sub -
DMX
Sub -
address
value
address
23
234
24
235
25
236
26
237
27
238
28
239
29
240
30
241
31
242
32
243
33
244
34
245
35
246
36
247
37
248
38
249
39
250
40
251
41
252
42
253
43
254
44
255
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
Advertenties
Inhoudsopgave
