Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Attaching the baseplate to the tripod
Fig . C to G
Fig.
Description
Place the baseplate
spotlights
and handle
9 ]
[
open mounting clamp
The handle
[
8 ]
direction of the retaining plate
mounting clamp
C,
Place the holes on the underside of
D
the baseplate
mounting clamp
E
Close the retaining plate
mounting clamp
F
Fold the bracket of the mounting
clamp
upwards so that it grips the
11 ]
[
retaining plate
G
Press down the locking handle of
the mounting clamp
baseplate
.
[
7 ]
Attaching the spotlights to the baseplate
Fig . H
Secure the spotlight brackets
baseplate
.
7 ]
[
To do so, use the following fastening materials:
–
Spotlight fixing screws
4 ]
[
–
Flat washers
5 ]
[
–
Spring washers
6 ]
[
Turn the spotlight fixing screws
until fully tightened .
Attaching the power cord holder
Fig . I
Unscrew and remove the power cord holder
fixing screw
from the handle
[
15 ]
Attach the power cord holder
handle
with the power cord holder fixing
[
8 ]
screw
.
[
15 ]
Turn the power cord holder fixing screw
clockwise until fully tightened .
10 GB/IE/NI
with the
[
7 ]
onto the
[
8 ]
.
[
11 ]
must be aligned in the
on the
[
23 ]
.
11 ]
[
on the pins of the
[
7 ]
.
11 ]
[
of the
23 ]
[
.
[
11 ]
.
23 ]
[
to fix the
11 ]
[
to the
[
22 ]
clockwise
[
4 ]
.
8 ]
[
to the
[
16 ]
15 ]
[
˜ Use
Connect the power plug
outlet .
m
CAUTION: Do not move the product's power
cord
after connecting the power plug with
[
18 ]
a socket-outlet . Risk of the product slipping or
tilting .
˜ Using the product outdoors
Fig . J
Connect the power plug
IPX4 socket-outlet only .
If an IPX4 socket-outlet should not be available,
the power plug
18 ]
[
only .
Press the switch
19 ]
[
(maximum brightness) to switch on the product .
˜ Connecting an external device
to the product's socket
m
WARNING: Risk of fire! Do not
connect any appliance with a total output of
> 2500 W .
For HG11410/HG11410-FR:
m
WARNING: Risk of electric shock! Only
use additional appliances if they are equipped
with a waterproof power plug with an IPX4
marking . If the wrong power plug is used,
water can enter the product and cause an
electric shock .
Open the socket cover
product .
Plug the external appliance into the socket
of the spotlight
[
9 ]
For HG11410-BS:
m
WARNING: Risk of electric shock!
Water may enter the product if the socket
cover
is not properly closed .
17 ]
[
Close the socket cover
Lock the socket cover
(Fig . N, O) .
with a socket-
18 ]
[
with an
[
18 ]
must be connected indoors
to position I or position II
at the rear of the
17 ]
[
(Fig . N, O) .
.
17 ]
[
with the interlock
[
17 ]
20 ]
[
21 ]
[
Advertenties
Hoofdstukken
Inhoudsopgave
