6 Additional Functions
6.1 Maximum brightness of the spotlight
If the maximum brightness of the spotlight is not
required, the brightness may be reduced to 33 % of
its maximum value . Thus, the brightness can be set
more precisely, because the 255 brightness levels are
available for a smaller brightness range .
1) Press the button MENU repeatedly until the high-
est menu level has been reached .
2) Press the button UP or DOWN repeatedly until
the display indicates
3) Press the button ENTER . The display indicates
,
,
4) Press the button UP or DOWN repeatedly until
the display indicates
5) Press the button ENTER . The display indicates the
current setting:
= maximum brightness
= brightness reduced to 33 %
6) To be able to control the spotlight by DMX, use
the button MENU to return to the highest menu
level .
For an independent operation, use the button
MENU to select the operating mode and then
press ENTER to activate the mode selected .
6.2 White balance
The factory setting of the spotlight is such that the
colours red, green and blue – when set to maximum
brightness – result in a specific shade of white . This
shade of white may be changed to appear warmer
or colder, e . g . to level out the differences to other
spotlights when they are controlled together with
the PARC-56 / RGB or PARC-64 / RGB .
1) Press the button MENU repeatedly until the high-
est menu level has been reached .
2) Press the button UP or DOWN repeatedly until
the display indicates
3) Press the button ENTER . The display indicates
.
4) Press the button ENTER again . The display now
indicates ,
or
and 255 .
= brightness of colour red
= brightness of colour green
= brightness of colour blue
5) Use the button ENTER to select the three setting
options one after the other; use the button UP
or DOWN to set the brightness for the individual
colours and thus to create the shade of white
desired .
18
All manuals and user guides at all-guides.com
.
,
,
or
.
.
and a number between 000
6) To activate the shade of white that has been set:
a) Press the button MENU repeatedly until the
display indicates
b) Press the button DOWN twice so that the dis-
play indicates
.
c) Press the button ENTER . The display changes to
,
,
,
d) Press the button UP or DOWN repeatedly until
the display indicates
e) Press the button ENTER . If the display indicates
, the shade of white is activated; if it indi-
cates
, use the button UP or DOWN to set
the indication to
7) To be able to control the spotlight by DMX, press
the button MENU twice to return to the highest
menu level . For an independent operation, use
the button MENU to select the operating mode
and then press ENTER to activate the mode
selected .
6.3 Slow response of the LEDs
LEDs immediately respond to a change of the bright-
ness setting . To simulate the slow response of stand-
ard lamps, the response can be set in four steps .
For the 10-channel operation
made via DMX channel 9 (
5-channel operation, make the setting as follows:
1) Press the button MENU repeatedly until the high-
est menu level has been reached .
2) Press the button UP or DOWN repeatedly until
the display indicates
3) Press the button ENTER . The display changes to
,
,
,
4) Press the button UP or DOWN repeatedly until
the display indicates
5) Press the button ENTER . The display indicates the
current setting:
= immediate response
= slightly slow response
= slow response 2
= slow response 3
= slowest response
Use the button UP or DOWN to select the setting
desired .
6) To be able to control the spotlight by DMX, use
the button MENU to return to the highest menu
level .
For an independent operation, use the button
MENU to select the operating mode and then
press ENTER to activate the mode selected .
again .
,
or
.
.
.
, the setting is
☞
fig . 8) . For 3-, 4- and
.
,
or
.
.