Advertenties
Application Table
The following table should be used only as a recom-
mendation.
The most suitable combination for the work to be per-
formed is best determined by practical trials.
Material
Grain
Rough
sanding/
Fine
sanding
Paint
180/400
roughing
Paint
120/240
touch-up
Paint removal
40/80
Softwood
60/240
Hardwood
60/180
Veneer
240/320
Aluminium
80/240
Steel
60/240
Rust removal from steel 40/120
Stainless steel
120/240
* I: Hard sanding plate
II: Soft sanding plate
III: Extra soft sanding plate
Polishing
For the polishing of weathered paint or buffing out of
scratches (e.g., Acrylic glass), the machine can be
equipped with appropriate tools such as a lamb's wool
bonnet, polishing felt or sponge (optional accessories).
When polishing with high speed, take care that
the polished surface does not become exces-
sively warm.
For polishing, the vacuuming adapter 4 can be re-
moved to make the machine easier to handle and to
prevent damage to the work piece (see Removing the
Vacuuming Adapter).
Apply polishing agent crosswise or in a circular motion
with a sponge and moderate pressure and then allow
to dry lightly.
Polish the partially dried polishing agent with cross-
wise or circular motions using a lamb's wool polishing
bonnet.
Cleaning the polishing tools.
Clean the polishing tools regularly to ensure good pol-
ishing results.
It is recommended to wash the polishing tools with a
mild detergent and warm water (do not use paint thin-
ning agents).
2 609 932 151 • (03.03) T
All manuals and user guides at all-guides.com
s
s
Thumb-
Sanding
wheel
plate*
When the sanding plate is changed (see Changing the
Position
Sanding Plate), check the sealing collar 10 for dam-
age. Have a damaged sealing collar replace by Bosch
customer service.
2–3
II
WARNING
4–5
I
Important instructions for connecting a new 3-
pin plug to the 2-wire cable.
5
II
The wires in the cable are coloured according to the
5–6
III
following code:
5–6
II
Live = brown
5
III
4–5
II
5
II/I
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If the plug on the cable of this machine
6
III
must be replaced, dispose of the old plug to prevent
5
II
misuse.
If the machine should fail despite the care taken in
manufacture and testing, repair should be carried out
by an authorised customer services agent for Bosch
power tools.
For all correspondence and spare parts orders, always
include the 10-digit order number of the machine.
English–4
Maintenance and Cleaning
Before any work on the machine itself, pull the
mains plug.
For safe and efficient working, always keep the ma-
chine and the ventilation slots clean.
Strain relief
Neutral = blue
To be fitted
by qualified
professionals only
Advertenties
