Quick start guide
THANK YOU FOR BUYING OUR PRODUCT.
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
CONTROL PANEL
ON/STAND-BY
Press the Refrigerator Temperature
turn the appliance on stand-by.
When in Stand-by mode the light in the refrigerator compartment does
not turn on. Press the button again briefly to reactivate the appliance.
SETTING THE TEMPERATURES
Press the Refrigerator Button
refrigerator compartment.
Recommended setting for Refrigerator compartment is MED
Press the Freezer Button
to set a different temperature in the freezer
compartment.
Recommended setting for Freezer compartment is MED
LEAST COLD
MEDIUM
COOLEST TEMP
FAST FREEZING
Led off
Led on
Recommended setting:
•
Refrigerator compartment: MEDIUM
To avoid food waste, please refer to the recommended setting and storage
times found in the online user manual.
* Available only on certain models
1
2
3 4
5 6
button for 3 seconds to
to set a different temperature in the
Before using the appliance carefully read the Safety Instruction.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally filled
appliance. Position the antibacterial anti-odour filter in the fan as
demonstrated in the filter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch off the acoustic alarms.
1.
2.
3.
4.
5.
6.
FREEZING FRESH FOOD
Place the fresh food to be frozen in the FREEZING ZONE in the freezer
compartment avoiding the direct contact with the food that is already
frozen. To optimize the freezing speed, the lower drawer can be
removed and the food can be placed directly on the bottom of the
compartment.
FAST FREEZE FUNCTION
In order to preserve at best, please use the Fast Freeze function before
putting a large quantity of food in the freezer cavity.
Press the button (6) until all the three leds are on in order to set the
function.
The function turns off automatically after 26 hours, or manually by
selecting different freezer temperature.
Note: Please avoid a direct contact between the fresh food and the food
already frozen. To optimise the freezing speed, drawers can be removed
and the food can be placed directly on the bottom of the compartment.
Refrigerator Temperature / Stand By
Temperature Indicator setting
Refrigerator Indicator
Alarm Indicator
Freezer Indicator
Freezer Temperature / Stop Alarm
EN