Advertenties
Proceed as follows before starting work.
water and low-foam detergent. Leave at least 5 cm between the surface of the liquid and the opening of
water and low-foam detergent. Leave at least 5 cm between the surface of the liquid and the opening of
the tank;
the tank;
front and rear blades are not worn.
front and rear blades are not worn.
adjust the working height of the squeegees.
adjust the working height of the squeegees.
Working
After setting up the machine, proceed as follows:
mains powered versions: plug the machine into the mains power socket and press the main
trols - Descriptions");
trips, stop work and empty the tank.
a few seconds, the brush and suction motor shut down to prevent draining the batteries excessively.
a few seconds, the brush and suction motor shut down to prevent draining the batteries excessively.
Charge the batteries.
Charge the batteries.
At the end of work:
At the end of work:
sure from deforming the drying blades, standard version with brushes and drive disks;
sure from deforming the drying blades, standard version with brushes and drive disks;
remove the brush (or drive disk) to prevent it from warping permanently;
IMPORTANT!
IMPORTANT!
follow a few simple rules:
WARNING
EN
-
After
After
- -
27
Advertenties
