9. Transport when
travelling
9.1 Transport lock
To secure the toothbrush 10 against acci-
dentally being switched on, activate the
transport lock.
•
Switching on the transport lock:
Hold down the on/off switch
switched-off toothbrush until the LED 6
flashes red three times.
•
If you try to switch on the tooth-
brush 10 with the transport lock activat-
ed, the LED 6 will flash red.
•
Switching off the transport lock:
Hold down the on/off switch
the LED 6 flashes red three times.
9.2 Travel case
The travel case 14 has space for the tooth-
brush 10 and 2 toothbrush heads 3.
•
Open the travel case 14 by pressing
on the pressure cap 15.
•
Close the travel case 14 by carefully
pressing the lid down until it audibly
clicks into place.
10. Cleaning/Hygiene
requirements
Before cleaning the battery charg-
er 12, pull the mains plug 13 out from
the mains socket.
Do not immerse the toothbrush 10 and
7 of the
battery charger 12 in water! The bat-
tery charger 12 must be completely dry
before you reconnect it to the wall sock-
et.
•
To ensure the hygienic functionality of
the toothbrush heads 3 they must be
7 until
rinsed thoroughly after every use and
allowed to dry.
•
Remove the toothbrush head 3 once
per week and clean it in hot water.
•
Rinse the toothbrush 10 as well and
wipe it dry.
•
Wipe the battery charger 12, the travel
case 14 and the toothbrush head hold-
er 16 with a damp cloth if necessary
and rub it dry.
11. Storage
•
Disconnect the device from the power
supply and store it in a dry location.
DANGER! Risk of electric
shock!
9
GB