Inhoudsopgave
Advertenties
Operation settings
We recommend using the switch setting P.
The right degree of chopping/mincing (from
coarse to fi ne) for meat, onions, dried fruit,
celery, fi sh etc. is normally achieved after
15-30 seconds.
Puréeing
The bowl can be fi lled with a maximum of
1 litre of cold liquid (e.g. soup). Ensure,
however, that the temperature is not above
80 °C.
∙ Always start processing at speed level I;
increase to level II if necessary.
Kneading
∙ Fit the drive shaft to the drive unit.
∙ Attach the bowl with the handle to the
right and turn it clockwise to lock until
the lock symbol and triangular mark are
aligned.
∙ Fit the drive shaft extension to the drive
shaft.
∙ Fit the kneading insert to the drive shaft
extension so that the insert almost
touches the bottom of the bowl.
∙ Put the lid on the bowl and turn it
clockwise until it locks into place.
∙ For safety reasons, use the appropriate
pestle at all times when feeding the
ingredients down the food chute. During
operation, the pestle should remain
inserted.
Note:
∙ Put the ingredients into the bowl. For
700 g of dough, about 400 g of fl our and
290 ml of water are needed.
∙ When making dough, the appliance
should not run for more than 60 seconds
at a time, after which it should be allowed
All manuals and user guides at all-guides.com
Operation settings
∙ Always start processing at speed level I;
∙ The dough is ready once it has formed
Slicing and grating
∙ Fit the drive shaft to the drive unit.
∙ Attach the bowl with the handle to the
∙ Fit the desired attachment to the insert
∙ Fit the attachment mounting to the drive
∙ Put the lid on the bowl and turn it
∙ For safety reasons, use the appropriate
∙ Always switch the appliance on before
∙ Do not put in more than 1 kg of food.
to cool down for 1 minute. A maximum of
5 such cycles should not be exceeded,
after which the appliance must be allowed
to cool down completely.
increase to level II if necessary.
into a ball.
right and turn it clockwise to lock until
the lock symbol and triangular mark are
aligned.
mounting and push it down until it is heard
locking into place.
shaft.
clockwise until it locks into place.
pestle at all times when feeding the
ingredients down the food chute. During
operation, the pestle should remain
inserted.
feeding the ingredients down the food
chute.
When processing larger quantities, the
bowl must be emptied from time to time.
13
Advertenties
Inhoudsopgave
