Kemper 1760 Handleiding pagina 7
Draadloos lijm pistool
Inhoudsopgave
When the appliance is not used and before any maintenance operation, the appliance must always be
unplugged. Do not connect the appliance to power extension or to triple plug outlet. Do not do not pull or
damage in any way the power cord. If the appliance does not work properly, immediately turn off the
appliance and disconnect it from the mains socket. For repairs, contact a technical support center authorized
by the manufacturer, and require that original spare parts be used. Using parts that do not conform to the
product may seriously compromise its correct operation.
The appliance is made of dangerous parts that should be kept out of reach of children. If necessary wear eye
protection. Keep the appliance out of reach of children.
1. This glue gun can be used either directly connected to the mains power supply or wireless, connected to
the supplied support. If you want to use it in cordless mode, connect the power cord to the stand and
place the glue gun on the stand, otherwise always mount the metal stand by inserting it into the
appropriate holes and connect the power cord directly to the gun.
2. Connect the cable to the mains power supply. Load the glue stick at the back of the gun.
3. Push the trigger several times until the glue stick reaches the inlet hose
4. Heat the gun for hot glue for as long as necessary (3-5 minutes).
5. When the gun reaches the working temperature, press the trigger until the melt glue comes out of the
nozzle. In cordless mode, the gun has an autonomy of about 60 seconds after heating, then must be
replace on the support for recharging.
6. Glue does not need to be coated. Press the surfaces to be glued together within 15 seconds.
7. No need for clamps or other sealing devices when the surfaces are glued. For better bonding, clean the
surfaces before applying the glue.
8. Disconnect the glue gun after use.
9. Do not pull the glue stick out from the back of the glue gun.
10. Stop the power supply of the glue gun and stop using within 15 minutes, so that it does not overflow the
glue.
This glue gun is equipped with 3 types of tips with different diameters in order to vary the quantity of glue
dispensed.
ATTENTION: The tips should be replaced when the gun is hot because otherwise the glue will solidify
and the tip can not be removed. Always wear protective gloves when replacing the tip. Check the
presence of the gasket in the tip you want to use.
1. Pull the plug out of the socket before cleaning!
2. Clean the appliance with a dry cloth.
3. If you don't want to use this appliance for a period of time, store it on a dry and well ventilated place. Keep
it out of reach of children.
INSTRUCTIONS FOR DISPOSAL
Disposal of this product shall be governed by the European Community Directive 2012/19/UE on Waste Electrical and Electronic Equipment
(WEEE). According to this regulation, the consumer has the obligation NOT to dispose of this product as household waste but through separate
channels of collection (WEEE). In the case of purchasing a similar new product, this product can be disposed free of charge from the
distributor. The disposal is free, no purchase required, for WEEE small size (external dimensions below 25 cm). Comply with local
regulations in the fields of waste disposal. It is always possible to dispose of this product at a WEEE collection center predisposed by
the public administration. The incorrect disposal of this article could have potential adverse effects on the environment and human health.
This symbol indicates the consumer's duty to dispose of this article as WEEE and NOT as household waste. Improper disposal of the
product by the consumer involves the application of administrative sanctions provided by law.
DT ISTR 1760_03/17_REV. 0
USER INSTRUCTION
MAINTENANCE
1760
7/28
Inhoudsopgave
