Inhoudsopgave
Advertenties
For HG11622C: Place the mounting plate
on the ground then fixed it with earth spikes
(see fig. A).
Further steps for both types of installation:
For HG06586A, HG11622B: Attach stand
pipe
to the stand
7
tighten the fixing screw
pipe
to the stand
7
Hint: Install the fixing screw
hole of stand pipe
surface of the stand pipe
Press the interlock
11
LED tree
to stand pipe
9
For HG11622C: Screw the stand pipe
into mounting plate
to stand pipe
(see fig. B).
7
Bend the individual branches of the LED tree
to the desired shape (see fig. C). Remind not to
bend all the branches just to one side (see fig. E).
The 10 m lead wire
hand when first use. Insert the connector
10 m lead wire
8
adapter
and tighten the screw connection,
4
in order to prevent moisture from penetrating
inside. Pay attention to the sealing ring
plug the power adapter
fig. D).
Use the velcro cable fastenings
the 10 m lead wire
HG06586A, HG11622B) (see fig. F).
Timer function
The timer button
5
1 x push of the button:
The product lights up continuously.
2 x push of the button:
The product lights up continuously for 6 hours
and then switches itself off for 18 hours. The prod-
uct will then switch on again for 6 hours at the
allocated time and then switch off for 18 hours.
Note: The timer button
timer function has been activated.
16 GB/IE
or ground spike
3
1
if mount the stand
2
(see fig. A1‒2).
3
though the
2
but do not fixed it on the
7
(see fig. A2).
7
of stand pipe
and attach
7
(see fig. B).
7
7
then attach LED tree
3
must be unwound before-
8
of the
12
into the socket of the power
. Then
6
into a socket (see
4
to secure
10
along the pipe (for
8
has three functions:
lights up when the
5
3 x push of the button:
3
The product is switched off.
1
Cleaning and care
and
SHOCK! First pull the power adapter
the socket.
SHOCK! For reasons of electrical safety the product
must never be cleaned with water or other liquids
or immersed in water.
Do not use any solvents, petrol or similar items.
This would damage the product.
9
Only a dry, lint-free cloth should be used for
cleaning.
9
Easy to clean for heavy soiling, with a slightly
damp cloth.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Observe the marking of the packaging
materials for waste separation, which
b
are marked with abbreviations (a) and
a
numbers (b) with following meaning:
1–7: plastics/20–22: paper and fibre-
board/80–98: composite materials.
Contact your local refuse disposal au-
thority for more details of how to dispose
of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
DANGER OF ELECTRIC
out of
4
DANGER OF ELECTRIC
Advertenties
Hoofdstukken
Inhoudsopgave
