Dometic SINEPOWER MSI912 Montagehandleiding En Gebruiksaanwijzing pagina 30
Verberg thumbnails
Zie ook voor SINEPOWER MSI912:
- Montagehandleiding en gebruiksaanwijzing (432 pagina's)
Advertenties
Cleaning and caring for the inverter
11
Cleaning and caring for the inverter
A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
12
Troubleshooting
!
WARNING!
Do not open the device. You risk sustaining an electric shock by doing
this.
I
NOTE
If you have detailed questions on the specifications of the inverter
please contact the manufacturer (addresses on the back of the instruc-
tion manual).
The 'Load Status' LED (fig. 6 3, page 4 to fig. 8 3, page 5) red indicates a fault:
LED display
Cause
Quick flashing
Input voltage is too high
Slow flashing
Input voltage too low
Occasional flash-
Overheating
ing
30
All manuals and user guides at all-guides.com
Remedy
Check the input voltage and reduce it.
The battery needs recharging.
Check the cables and connections.
Switch off the inverter and the load.
Wait about 5 – 10 minutes.
The inverter is being reset.
Then switch the inverter back on without
the load.
Reduce the load and make sure the
inverter has better ventilation. Then switch
the load back on.
SinePower
EN
Advertenties
