Inhoudsopgave
Advertenties
• Never place the appliance near the edge of a countertop
during use. Vibrations may occur during use which may
cause the appliance to move. Always place the appliance on
a stable, flat, heat, and moisture resistant surface.
• Never use metal utensils to remove food from the pan. Metal
utensils may damage the non-stick coating.
BEFORE FIRST USE
1. Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the
device.
2. Wipe the inside and outside of the appliance with a moist cloth.
3. Place the appliance on a stable, horizontal and level surface, do not place the appliance on non-heat-
resistant surfaces.
4. When the device is turned on for the first time, a slight odour will occur. This is normal, ensure adequate
ventilation. This fragrance is only temporary and will disappear soon.
USE
Using the appliance
Put the main plug in an earthed wall socket.
Pull the basket A
out of the airfryer
3
Put the frying plate in the basket.
Note: Never use the appliance without frying plate.
Put the ingredients into the basket A
3
Do not use oil or any other liquids in the air fryer. (Maximum ½ teaspoon of oil may be added when cooking
fries or steak).
Slide the basket A
into the airfryer
3
Press the on/off switch. The display B
will become active.
d
Select a program or manually adjust the desired temperature and time of cooking.
The appliance features an automatic shake reminder when ingredients need shaking during the cooking
process. This feature ensures optimal results by prompting timely intervention, ensuring thorough mixing
and even cooking.
When you hear the timer beep, the set preparation time has elapsed. The device will shut off after 20
seconds. Pull the basket A
out of the appliance and place it on a heat-resistant surface.
3
Check if the ingredients are ready. If the ingredients are not ready yet, simply slide the basket back into the
appliance and set the timer to a few extra minutes.
To turn off the device, press the on/off button until the display turns off
MANUAL SETTING:
Press the time + B
and time – B
icon to set the desired cooking time. The time will increase or decrease
u
i
in 1-minute increments.
Press the temperature + B
or temperature - B
f
g
temperature will increase or decrease in 5°C increments.
The temperature can be set between 80°C and 200°C.
The timer can be set between 1 and 60 minutes.
Note: It is not necessary to preheat the device.
PROGRAM SETTING:
See for presetting information the table below:
© Princess | Digital Airfryer
icon to program to the desired cooking temperature. The
8
| 01.182256.01.001
Program
Icon
Quantity
Fries
500 g
Bread
300g - 500g
Steak
200 g
Fish
200 g
Drumsticks
600 g
Shrimp
200 g
Vegetables
200 g
Manual mode
N/A
Keep warm
N/A
function
After the cooking time has elapsed, the appliance will beep 3 times before it switches off automatically. The
fan will continue running for about 30 seconds to cool down the unit.
SHAKE FUNCTION
When a program is halfway, the appliance will show the shake reminder icon.
The Shake reminder function is only enabled if the set cooking time is equal to or more than 6 minutes.
The shake reminder is indicated by the sound of 1 beep. The display will show a flashing "SHAKE".
Pull the basket A
out of the airfryer
3
Shake the basket a few times. Be careful to not shake too hard so that the hot ingredients will not fall out.
Slide the basket A
into the airfryer
3
For the Fries program B
, the device will suggest to shake the fries every 5 minutes.
8
The shake reminder will continue to flash if not completed, but will continue the program. After completion,
the shake reminder will also turn off.
START/PAUSE BUTTON
Press the start/pause button B
to pause the program.
o
Pressing the start/pause button again will start the cooking process based on the shown settings on the
display.
When the basket is removed from the device, the device will automatically pause its program.
When entering the pause mode, the heating tube will immediately stop working. The fan will work for 20
seconds before stopping. The digital screen displays the remaining time and the current temperature. It will
flash synchronously with the currently working menu button. The two middle points of the display will not
flash.
When paused, press and hold the pause/start button to exit the pause state and enter the standby state.
If there is no operation within 5 minutes in the pause state, the device will enter standby mode.
Note: The power button the "+" and "-" keys are always on and can be operated normally. All other buttons
are off and inoperable.
PREHEAT FUNCTION
Press the preheat button B
. The button will start flashing, indicating that the preheat function is turned
p
User manual
Default
Time when
temperature/
preheated
time
200°C / 20
18 minutes
minutes
160°C / 30
28 minutes
minutes
180°C / 15
13 minutes
minutes
180°C / 20
18 minutes
minutes
190°C / 25
23 minutes
minutes
180°C / 10
8 minutes
minutes
150°C / 10
8 minutes
minutes
180°C / 20
20 minutes
minutes
80°C / 15
15 minutes
minutes
9
Advertenties
Inhoudsopgave
