Viessmann Vitoplanar EG3 Montage- En Gebruikshandleiding pagina 65
Dim
Beschikbare talen
Beschikbare talen
Installation instructions
Important: do not open the dim module, all installation steps are performed
from outside.
• Pull the mains power lead out of the radiant heater.
• Attach the dim module at the plug end of the radiator and secure using 2-off
M4x10 Allen screws and 2-off 4.3 mm serrated washers.
• Insert the plug-in connector of the dim module in the panel connector of the
basic device.
• Plug the mains lead into the connection module and switch on the power.
65
6131173,
04/2020
