Sharp SJ-BD237E2XS-EU Handleiding pagina 14
until the super cool symbol appears, and
if you do not push any button within 1
second, super cool will flash.
• If you continue to press the button, it will
restart from +8 °C.
• The temperature value selected before
holiday mode, super freeze mode,
super cool mode or economy mode
is activated and will remain the same
when the mode is over or cancelled. The
appliance continues to operate with this
temperature value.
Recommended Settings for the Freezer
and Cooler Compartment Temperature
Freezer
Cooler
Compartment
Compartment
-18
C
o
-20
C, -22
C
o
o
or -24
C
o
SF
-18
C, -20
C,
o
o
-22
C or
o
-24
C
o
-18
C, -20
C,
o
o
-22
C or
o
-24
C
o
Note:Some built-in appliances may have a
stand-by mode.
3.4.3 Stand-By Mode
Purpose
Remarks
For regular
4
C
use and best
o
performance.
Recommended
when
4
C
environmental
o
temperature
exceeds 30 °C.
Must be used
when you wish
4
C
to freeze food in
o
a short period of
time.
These
temperature
settings must be
used when the
environmental
temperature is
2
C
high or if you think
o
the refrigerator
compartment is
not cool enough
becuse the door
is being opened
frequently.
Must be used
when the
refrigerator
compartment is
SC
overloaded with
food or when
food needs to be
cooled quickly.
This mode can be used to save energy
when you go on vacation.
How Would It Be Used?
*Select "8" set value.
*Push mode and cooler Set Button for 5
seconds.
*Display will show "St" "bY" on the screen.
During This Mode:
In stand-by mode; all components will be
disabled.
If you push the display button, display
will show "St" "bY" on the screen to show
stand-by mode is active.
To cancel; push mode and cooler set button
for 5 seconds.
After the mode is deactivated, an error
code may light on the display because the
product maybe not cool enough. The error
code will turn off when the product reaches
normal temperature.
3.4.4 Door Open Alarm Function
If fridge door is opened more than 2
minutes, appliance sounds 'beep beep'.
3.5 Temperature Settings Warnings
• Your appliance is designed to operate in
the ambient temperature ranges stated
in the standards, according to the climate
class stated in the information label. It
is not recommended that your fridge is
operated in the environments which are
outside of the stated temperature ranges.
This will reduce the cooling efficiency of
the appliance.
• Temperature adjustments should be
made according to the frequency of
door openings, the quantity of food kept
inside the appliance and the ambient
temperature in the location of your
appliance.
• When the appliance is first switched on,
allow it to run for 24 hours in order to
reach operating temperature. During this
time, do not open the door and do not
keep a large quantity of food inside.
• A 5 minute delay function is applied
to prevent damage to the compressor
EN - 13
