Logitech QuickCam Installatiehandleiding pagina 3
Beschikbare talen
Beschikbare talen
Logitech
®
QuickCam
®
Installation
3
Camera Setup
During the Camera Setup step of the installation process, you will be
prompted to connect the camera to a USB port on your computer.
Important: Do NOT connect the camera until you are prompted
to do so.
4
Position Your Camera, Microphone,
and Speakers
Your camera comes with Logitech
®
RightSound
™
following steps will ensure the best possible audio performance:
1.
Position your camera in the middle of your monitor for optimal eye
contact.
2.
Position your camera's microphone no more than 3 feet (1 m) away
from you and point it toward you.
3.
Position your speakers (if used) at least 12 inches (30 cm) away from
your microphone to reduce feedback, and then angle your speakers
away from your microphone.
Tip Do not place objects between you and the microphone.
English
echo-cancellation technology. The
Logitech
®
QuickCam
®
Installation
5
The Audio Tuning Wizard
The first time that you start QuickCam, you are guided through
the Microphone/Speaker Setup Utility and Audio Tuning Wizard that
lets you do the following:
•
Select the audio input device (microphone)
and audio output device (speakers).
•
Enable Acoustic Echo Cancellation (AEC)—recommended.
•
Specify microphone input volume and speaker output
volume.
•
Test audio settings.
Tip
To change these settings later, in the QuickCam
click the Settings
button and then click the Audio tab.
®
software,
English
