Miele PAC 1045 Gebruiksaanwijzing pagina 48
Beschikbare talen
Beschikbare talen
en - Using the machine
Changing the op-
erating status
Displaying oper-
ating values
Deactivating the
keypad lock
48
All manuals and user guides at all-guides.com
If you wish to change the operating status, you can switch between
Ready for operation
,
CO2 operation
ThermoControl active
,
Press the button repeatedly until you reach the desired operating
status.
Tip: If you wish to clean the filter manually via Miele ThermoControl,
press the button repeatedly until you reach the
ive
operating status. Relevant pathogens will then be deactivated in
the filter by Miele ThermoControl. After Miele ThermoControl, the fan
keeps running automatically in order to cool down the filter safely,
after which the appliance switches back to the
operating status.
The operating values of the air purifier can be displayed via the
ating values display
menu.
Press and hold the button for more than 3 seconds.
Operating values display
Operating hours
1245
h
Time to filter change
523
h
Miele
V01.1
PAC 1080
09.11.2020
Mon
14:28:00
The
Operating values display
Operating values display
Filter saturation
25
%
Room temp.:
22
°C
ThermoControl temp.
34
°C
09.11.2020
Mon
14:28:00
Press the or button briefly to scroll through the pages of the
Operating values display
To exit the operating values display, briefly press the and but-
tons at the same time (<1 sec) or wait 10 seconds.
If the display lighting is switched off, the keypad lock is activated. You
can deactivate the keypad lock by holding down the and but-
tons for at least 3 seconds.
If no buttons are pressed within 60 seconds of deactivating the
keypad lock, it will be reactivated again automatically.
Flow
(if selected via option),
and
menu is now displayed.
menu.
Manual operation
Fan run-on
at any time.
ThermoControl act-
Ready for operation
/
Oper-
