Inhoudsopgave
Advertenties
Cooking zone timers can be used to switch a cooking
zone OFF automatically after the set time has run out.
It can be adjusted within a range of 1 min to 9 h 59 min.
During the time is running, the cooking zone can be
operated normally, i.e. changing the cooking level is
possible.
Each cooking zone has an independent timer, i.e. an
individual time selection per cooking zone is possible.
1.
Precondition:
Pot is placed on the corresponding
zone and a cooking level has been set to this
cooking zone
2.
Select the corresponding cooking zone. Timer
indication displays shows "---". Press the timer
displays.
3.
Then use the Plus key
set the required time.
Left position: hours
Centre position: every 10 minutes
Right position: every minute
After a few seconds, the entry will be taken over
and the time will be running.
The timer symbol
The timer starts counting backwards. If it has reached
0, a signal tone will be emitted; the timer displays
show 000 and the corresponding cooking zone will be
turned OFF. Touch an arbitrary key to disable the
signal tone.
• Repeat steps 2 to 3 to program the cooking timer for
another cooking zone.
• To check the time that has lapsed press the timer display
(as a key). The setting displayed can be read and
changed.
• Terminating the timer: Select the respective cooking zone
and press the Minus key
• If several cooking zones have been programmed with the
automatic switch-off function, the timer display will always
show the cooking zone with the shortest time.
1. Switch on the hob. Do not select a cooking zone. The timer
display shows "---".
2. Touch the timer display. Then use the Plus key
Minus key
to set the required time. Do not perform any
action for about 5 seconds. The timer starts counting
backwards.
3. Once the time has lapsed, a signal will sound for a while and
can be switched off by pressing any key (except for the
ON/OFF key of the hob).
or the Minus key
of the cooking zone lights up.
to delete the time (0).
to
or the
Advertenties
Inhoudsopgave
