General Power Tool Safety Warnings; Grinder Safety Warnings - Makita 9561CR Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor 9561CR:
- Gebruiksaanwijzing (76 pagina's) ,
- Gebruiksaanwijzing (69 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH (Original instructions)
1.
Shaft lock
11. Depressed center grinding wheel/
2.
Slide switch
Multi-disc 21. Wheel guard for abrasive cut-off
3.
Indication lamp (speed adjusting 12. Inner flange or super flange wheel/diamond wheel dial) 13. Lock nut wrench
22. Abrasive cut-off wheel
4.
Indication lamp
14. Marking A
5.
Speed adjusting dial
6.
Wheel guard
16. Marking C
7.
Bearing box
17. Pin
8.
Screw 18. Vent
26. Exhaust vent
9.
Lever 19. Abrasive cut-off wheel/diamond
10. Lock nut
wheel
SPECIFICATIONS
Depressed center
wheel diameter
Spindle thread
Rated speed (n) / No load speed (
Overall length
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change
without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
6
Explanation of general view
23. Diamond wheel
15. Marking B
(5/32")
25. Thickness: 4 mm (5/32") or more
115 mm
9561CR
125 mm
9562CR
M14
n
12,000 min
)
0
289 mm
2.2 kg
ENE048-1
ENF002-2
GEA010-1
20. Inner flange
24. Thickness: Less than 4 mm
27. Inhalation vent
9564CR
9565CR
M14
-1
-1
12,000 min
299 mm
2.2 kg
Save all warnings and
instructions for future reference.
GRINDER SAFETY WARNINGS
Safety Warnings Common for Grinding, Sanding,
Wire Brushing, or Abrasive Cutting-Off Operations:
1. This power tool is intended to function as a
grinder, sander, wire brush or cut-off tool. Read
all safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
2. Operations such as polishing are not
recommended to be performed with this power
tool. Operations for which the power tool was not
designed may create a hazard and cause personal
injury.
3. Do not use accessories which are not specifically
designed and recommended by the tool
manufacturer. Just because the accessory can be
9561CVR
9562CVR
M14
2,800 -
-1
12,000 min
289 mm
2.2 kg
/II
9564CVR
9565CVR
M14
2,800 -
-1
12,000 min
299 mm
2.2 kg
GEB033-5
Advertenties
Inhoudsopgave
