Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
USE
Switching off the activated carbon filter saturation indicator
1.
Switch off the extractor hood and press and hold the on/off and
the timer buttons simultaneously for 3 seconds.
The L1 indicator will start to flash for 2 seconds.
Thermal cut-out
•
The hood is supplied with a temperature sensor that switches the
motor to speed 3 if the temperature near the controls becomes
too hot.
•
This is indicated by the L1, L2, L3 indicators that start flashing.
This situation will continue until the temperature has dropped to a
safe level.
•
To exit this mode press the on/off or fan settings button.
EN 7
Advertenties
Hoofdstukken
Inhoudsopgave
