Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
Authority or local store for recycling advice.
PARTS DESCRIPTION
1. Control buttons
2. Air outlet
3. Water level indicator
4. Caster wheel
5. Filter
6. Water tank
7. Ice boxes
8. Swing button
9. Off button
10. Low / Middle / High buttons
11. Cool button
BEFORE THE FIRST USE
•
Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
•
Place the device on a flat stable surface and ensure a minimum
of 10 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
•
Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the
local voltage before connecting the
device. Voltage 220V-240V 50Hz)
•
Fill the water tank.
1. Rotate the small knob to release the water tank.
2. Pull out the water tank.
3. Add water into the tank to at least the minimum level but don't
exceed the maximum level indicator.
4. Pour water into the ice box and put in the freezer until it is
completely frozen.
5. Put the frozen ice boxes into the water tank.
•
The frozen ice boxes can be put in the water tank to increase the
cooling effect.
Do not use the cooling / evaporator function if the water tank is
empty or if the water level is below the minimum mark, it can severely
damage the pump.
USE
•
Swing : Use the swing button to turn on the oscillation mode. The
airflow will now move from side to side.
Instruction manual
EN
5
Advertenties
Inhoudsopgave
