Download Inhoudsopgave Inhoud Print deze pagina

Cleaning And Maintenance - Radiola RAIM2313B Handleiding

Inhoudsopgave

Advertenties

up continuously. At this time, press "
ice cube size. If you need to clean the device, press "
button to select "
making cycle takes approximately 7-15 minutes, depending on ambient
temperature and water temperature.
7. The ice making cycle begins with water being pumped into the ice cube
tray located below the evaporator. After 7-15 minutes, ice forms on the
evaporator. Once this phase is complete, the ice cube tray tilts back
and the remaining water in the ice cube tray is drained into the water
tank.
8. The ice cubes then fall from the evaporator and are pushed into the
basket ice cubes by the ice scoop. The ice cube tray automatically
returns to position under the evaporator and begins a new cycle.
9. The "
ICE BASKET FULL" indicator lights up when the ice basket is
full, then the machine stops automatically the ice making cycle. Carefully
remove the ice cubes from the ice basket with the ice scoop. After 7.5
seconds, the ice maker will automatically restart its ice making function.
10. The "
ADD WATER" indicator lights up when the reservoir runs out of
water and the ice making cycle stops automatically. At this point,
remove the ice basket and add water to the water tank, then press the "
ON/OFF" button again to restart the ice making cycle. The device
starts working automatically after about 30 minutes if the user forgets to
restart the device after filling it.
11. Once the desired quantity of ice cubes has been obtained, stop the cycle
of making ice cubes by pressing the "
the appliance from the wall socket.
12. Open the top lid and transfer the ice cubes to a freezer.
13. Allow the ice maker to reach room temperature.
14. It is advisable to replace the water every week. Please empty the
water tank if the ice maker is not used for a long time.

CLEANING AND MAINTENANCE

To keep your ice cubes tasting fresh and your ice maker looking great,
we recommend that you clean your ice maker once a week.
1. Stop the ice cube making cycle by pressing the button
CLEAN" function in standby mode. The ice
EN-13
SELECT" button to select the
SELECT"
ON/OFF" button and unplug

Advertenties

Inhoudsopgave
loading

Inhoudsopgave