Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Safety
2.9.7
Drainage
An insufficient drain gap can damage the motor.
Do not block or seal the drain gap between the pump
housing and the motor.
2.9.8
Risk of frost
Drain the pump/unit and pipes at risk of freezing in plenty of
time.
Remove the pump/unit during periods of frost and store it in a
dry room.
2.9.9
Safe use of the product
Safe use of the product is no longer guaranteed in the following
instances:
If the pipework is not in proper condition.
If the pump seizes. See point 2.8 on page 10.
If protective devices are damaged or missing, e.g. protection
against accidental contact.
If there is stress on the pump/unit or pipes during installation.
12 EN
08|2018
Advertenties
Hoofdstukken
Inhoudsopgave
