Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Installation
Ensure the suction line does not leak and make sure that the
cover is screwed on tightly.
5.3
Installation
The pump can either be installed below the water level in intake
mode or above the water level in suction operation mode.
(1)
Fig. 3
A Installation above water level
= suction operation mode
(1) Foot valve is necessary for non-self-priming pumps
In suction operation mode, the suction height is significantly
reduced by flow resistance in the suction line or pipes which are
too low or have diameters which are narrow.
18 EN
A
B
B Installation below water level
= intake mode
W90.80.020-P
08|2018
Advertenties
Hoofdstukken
Inhoudsopgave
