Advertenties
Beschikbare talen
Beschikbare talen
5.2
Not allowed uses
•
Do not use the tool when being in unstable balance.
•
Do not cut materials which are different from wood.
•
Do not use the tool as a lever or to lift, move or break any object.
•
Do not use the tool if the atmosphere is explosive or inflammable.
5.3
Tool transport
When carrying the tool, keep its bar (2) facing backwards and inside its guard (15).
For long transports taking more than 15 minutes, keep the tool in its packaging. This prevents accidental damages to
things and/or injuries to people and/or damages to the tool during transport
5.4
Storing the tool
In case of long periods of tool inactivity:
•
Follow all the maintenance indications in the manual.
•
Empty the oil reservoir (14) and close its plug (12).
•
Remove the cutting residues (sawdust) from the front cover (5).
•
Perfectly clean and re-assemble the tool.
•
Put the bar into its guard (15).
•
Recharge the batteries before putting them into the carrying case.
•
Clean the tool and put it with its components into its case.
•
Store the tool in a dry place.
•
During long periods of inactivity recharge the batteries not later than every 3 months.
5.5
Troubleshooting
WARNING!
All the following maintenance operations shall be carried out by a maintenance technician.
FAULT
POSSIBLE CAUSE
Flat battery
The tool does not
work.
Disconnected battery
Possible electronic or mechanic problem
The battery is flat
The chain is not sharp
The tool cutting
strength decreases
The chain is too tensioned
Scarce lubrication
The chain is not tensioned enough
The chain stops.
Scarce lubrication
Worn chain
The chain skips
while cutting.
Damaged chain
The lubrication is
Low oil level in the reservoir (14)
not enough.
Damaged battery.
The battery does
Faulty battery charger.
not get completely
recharged.
Unsuitable battery charger.
Use and maintenance manual – Translation of
original Instruction.: 03, Date 16/12/2022
REMEDY
Recharge the battery (16)
Check the proper connection of the battery (16)
with the tool
Take the tool to an Authorized Service Point.
Recharge the battery (16)
Sharpen or replace the chain (1)
Regulate the chain (1) tension
Add oil into its reservoir (14)
Regulate the chain (1) tension
Add oil into its reservoir (14)
Sharpen the chain (1)
Replace the chain (1)
Add oil into its reservoir (14) using the plug (12)
Replace the battery (16)
Replace the battery charger (18)
Check that the battery charger (18) is the one
supplied with the tool.
Page 37
Advertenties
