Advertenties
Beschikbare talen
Beschikbare talen
6.1 Selecting the gear
▶ Operate the gear selector switch.
6.2 Setting the torque
The torque is limited only when the power tool is set to screwdriving
mode .
▶ Turn the adjusting ring to the desired torque setting.
6.3 Switching between forward (clockwise) and reverse rotation
(counter-clockwise)
An interlock prevents switching while the motor is running. The control
switch is locked when the forward/reverse switch is in the middle
position (switch-on interlock).
1. Operate the forward/reverse switch.
▶ The switch-on interlock is active.
2. Operate the forward/reverse switch.
▶ The direction of rotation is set as desired.
6.4 Switching on and off
1. Press the control switch.
▶ The power tool starts.
Speed can be controlled steplessly right up to maximum by varying
how far the control switch is pressed in.
2. Release the control switch.
▶ The power tool switches off.
6.5 Screwdriving
1. Set the torque. → page 29
2. Set the direction of rotation to forward (clockwise) or reverse (counter-
clockwise). → page 29
3. Press the control switch. → page 29
6.6 Drilling
1. Set the torque setting ring to the
2. Set the direction of rotation to forward (clockwise). → page 29
3. Press the control switch. → page 29
*2236948*
3
4
2236948
symbol.
English
29
Advertenties
