Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Min/max continuous measurement:
min/max
The LC display shows the max value, the min value and the current value.
Length measurement:
Device on
1x
Area measurement:
Wall area measurement:
1st area = height x length 1
2nd area = (height x length 2) + 1st area etc.
This function is suitable for the automatic addition of wall areas
of the same height. After the laser is switched on, the room
!
height must be determined with the 1st measurement; this will
then act as the height measurement for all of the remaining area
calculations. From the second measurement on, only the length
measurement needs to be taken. Every area calculation result will
be added to the previous ones.
16
EN
Measurement starts
automatically
Laser on
2x
1 sec
1. Measurement 2. Measurement
1x
2x
1. Measurement
(Height)
1x
2x
Measure
3x
3x
4x
2. Measurement
(Length 1)
3x
4x
Stop
1x
3. Measurement
(Length 2)
5x
6x
Advertenties
Inhoudsopgave
