Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Setup by Serial Number
1.
From the Wired Keypad, navigate to the Programing (installer) menu, select 7)Install >
2)WL Device > 2)Allocation > 2)By Code > 3) Keypad and then press
2.
If there are two receivers allocated to the system, select the receiver you wish to allocate
and then press
3.
Select the Keypad location in the system and then press
4.
Enter the Keypad's 11-digit Serial Number and then press
the Serial Number.
NOTE: Adding the keypad to the system can also be done remotely using the
configuration software by entering the serial number of the keypad or by RF communication.
01/2019
Page 4
; the keypad will display
5IN2812
Advertenties
Inhoudsopgave
