Download Inhoudsopgave Inhoud Print deze pagina

Maintenance And Care - FUXTEC FX-E1LB20 Handleiding

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 77
Manual_FX-E1LB20_Int24_rev5
- Hold the device in the working position (see following figure).
- Hold the blowpipe a few centimetres above the ground and make sweeping movements from one
side to the other.
- Slowly move forward.
- Keep the accumulated pile of dirt in front of you and blow from the outer edges. Do not blow into
the middle of a pile of dirt.
- A reduced blowing speed is best for light material.
- For heavier material and coarse dirt, a higher blowing speed is used.
- Use a rake or broom to loosen any waste adhering to the ground beforehand.
- Spray very dusty waste lightly with water to avoid excessive dust formation.

19. Maintenance and care

Warning: before carrying out any work on the power tool, remove the battery from the device.
Do not use water or liquid cleaning agents.
- Clean the leaf blower after each use with a dry cloth or with a brush if it is very dirty.
- Never spray the leaf blower with water.
- Keep the contacts of the battery and the device clean and dust-free.
26

Advertenties

Inhoudsopgave
loading

Inhoudsopgave